Load data for 9 x 57 Mauser + .355 | 147gr | ALSA PRO FMJ

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 147gr \| ALSA PRO FMJ
Manufacturer SKU:	FMJ_355_147
Bullet Weight:	147gr \| 9.5g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.661" \| 16.8mm
Caliber:	9 x 57 Mauser load data
Case Length (l3):	2.236" \| 56.8mm
Cartridge Length (C.O.L.):	2.774" \| 70.5mm
Seated Depth:	0.123" \| 3.1mm
Shank Seated Depth:	0.123" \| 3.1mm
Case Capacity:	64.2 Grains of Water \| 4.17 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B10928_C1243
Last updated:	2025-02-02

Load data for 44 loads in caliber 9 x 57 Mauser with .355 | 147gr | ALSA PRO FMJ bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	85%	36201	89%	**89	100%
[ADI AR 2219]*	<<locked>>	88%	36056	89%	**99	93%
Accurate 2015	<<locked>>	95%	36245	89%	**99	96%
[Accurate 2495]*	<<locked>>	97%	28747	71%	**13	93%
Alliant AR-Comp	<<locked>>	97%	34461	85%	**25	98%
Alliant Reloder-10x	<<locked>>	91%	36361	90%	**18	97%
Alliant Reloder-7	<<locked>>	84%	36318	89%	**46	98%
[Baschieri & Pellagri 106]*	<<locked>>	88%	36477	90%	**03	94%
[Hodgdon H322]*	<<locked>>	94%	36056	89%	**99	93%
[Hodgdon H335]*	<<locked>>	89%	36245	89%	**02	92%
[Hodgdon H4198]*	<<locked>>	85%	36405	90%	**97	93%
Hodgdon TrailBoss	<<locked>>	96%	28355	70%	**08	100%
IMR 4198	<<locked>>	88%	35984	89%	**53	98%
Norma 200	<<locked>>	88%	36056	89%	**99	98%
ReloadSwiss RS 14	<<locked>>	96%	27804	68%	**47	100%
[Rottweil R 901]*	<<locked>>	97%	35868	88%	**76	92%
[SNPE Vectan SP 10]*	<<locked>>	88%	35955	89%	**92	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	36172	89%	**07	92%
[Somchem S335]*	<<locked>>	97%	34896	86%	**13	93%
Vihtavuori N120	<<locked>>	87%	35781	88%	**43	100%
Vihtavuori N130	<<locked>>	93%	36201	89%	**49	97%
[Vihtavuori N133]*	<<locked>>	97%	33272	82%	**77	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	31618	78%	**80	99%
[ADI AR 2219]*	<<locked>>	83%	30081	74%	**38	90%
[Accurate 2015]*	<<locked>>	83%	23989	59%	**54	90%
[Accurate 2495]*	<<locked>>	92%	24163	59%	**62	90%
[Alliant AR-Comp]*	<<locked>>	83%	22118	54%	**11	90%
[Alliant Reloder-10x]*	<<locked>>	81%	25527	63%	**16	92%
Alliant Reloder-7	<<locked>>	81%	32982	81%	**67	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29022	71%	**20	91%
[Hodgdon H322]*	<<locked>>	88%	30081	74%	**38	90%
[Hodgdon H335]*	<<locked>>	87%	33069	81%	**23	90%
[Hodgdon H4198]*	<<locked>>	81%	32605	80%	**05	91%
Hodgdon TrailBoss	<<locked>>	81%	22321	55%	**63	100%
IMR 4198	<<locked>>	81%	28747	71%	**59	95%
Norma 200	<<locked>>	81%	28616	70%	**05	95%
ReloadSwiss RS 14	<<locked>>	81%	21901	54%	**99	100%
[Rottweil R 901]*	<<locked>>	93%	32155	79%	**80	90%
[SNPE Vectan SP 10]*	<<locked>>	85%	32329	80%	**03	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	93%	32300	80%	**15	90%
[Somchem S335]*	<<locked>>	92%	29602	73%	**79	90%
Vihtavuori N120	<<locked>>	81%	29501	73%	**89	99%
[Vihtavuori N130]*	<<locked>>	81%	24743	61%	**28	91%
[Vihtavuori N133]*	<<locked>>	88%	25759	63%	**54	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data